aimpoint comp m2
Q: Pro Ears have become the world leader in high-tech, electronic hearing protection protection/amplification products. When did this phenomena begin and why?
Answer

A: Pro Ears began with entrepreneur Dan Nigro in 1992. Dan was a professional handgun shooter and was unhappy with the current hearing protection protection products. Through his travels he met and became friends with one of the top audio electronics engineers in the world. The relationship between the engineer and the perfectionist resulted with the introduction of Pro Ears and the company has never looked back.

) on their website?

AR-15 Stock – Mesa_Tactical 6/26/2005 9:33:46 AM Originally Posted By Dawg180: Mesa Tactical posts here fairly often, hopefully they will see this thread and respond! Well, we aren’t sure what to say. Naturally we think it’s a great product, but when someone asks for reviews or opinions we try to let other more objective folks [...] m1a scope mount – Saiga Shotgun Accessories – Syrian President Vows To Stay In Power Syrian President Bashar al Assad has said he will not give up power until all his people want him to do so, blaming the violence in his country on a “foreign conspiracy”… New Play Parks For RAF Kids Three new play parks for children [...] Glock Accessories – AR-15 Stock Shooting Targets – eotech 3x One of the things that bugs me about the the AR10 is the set screws holding on the FSB/gas block. Will Armalite pin a FSB on request? Never had one with my SKS Rifle Stocks or my ar’s with no springs. “Those who hammer their guns into plows, will plow for those who do not.” Thomas Jefferson” User Info IM User Email User Reply Quote Report … Dec 2006 USA WI, USA 4021 : [...]

St. Louis to Host 1st Big Parade on Iraq War’s End Since the Iraq War ended, there has been little fanfare for the veterans returning home. No ticker-tape parades. No massive, flag-waving public celebrations. Sergeant Charged in Fort Carson Barracks Murder A combat engineer at Fort Carson has been arrested and charged in the slaying of a food operations specialist in the barracks at the Colorado Army post, officials said Friday. Conservation Groups Sue Navy Over Sonar Conservationists and Native American tribes are suing over the Navy’s expanded use of sonar in training exercises off the Washington, Oregon and California coasts, saying the noise can harass and kill whales and other marine life. Mossberg 500 Accessories shotgun light mount Mossberg 500 Accessories shotgun light mount US Appeals Court Upholds Stolen Valor Act A federal appeals court ruled Friday that a U.S. law making it illegal to lie about being a war hero is constitutional and making false statements is not always protected free speech. : 0-0-0 : 6/4/2011 8:46:51 Originally By SuperSet72: Price sounds about right. When I had the TR21R, it was about $550 used including mount. Very good optic but the TR2$ is better if you can find [...]

Vortex optics | Ar-15 Accessories … – Guns Plus, Firearm …Vortex optics Recon R/T 15×50 Tactical Scope with VMS Kit. Posted in AR-15 Scopes | Leave a comment. Leave a Reply … Mossberg 500 Accessories – Jul 2005 NJ, Offline Posts: 2505 Link To This Post EE Feedback 100% (6) Posted: 10/6/2011 3:22:07 PM EST Dont bother make sure the pin channel and bolt is clean shoot away User Info Joined: Oct 2008 CT, Offline Posts: 988 Link To This Post EE Feedback 0% (0) Posted: 10/6/2011 11:30:23 PM EST Make [...] When you mount your Benelli M2 Accessories with Urbino stock & cheek riser normally but quickly, are you looking thru the sights or over them? Also, how did the Urbino fit your Benelli M2 Accessories especially in the trigger area? IIRC, the Urbino for the M4 was tight in the trigger area. Mesa said they [...] aimpoint comp m4 | Ar-15 Accessories … – Guns Plus, Firearm …aimpoint comp m4. Military performance in sportsman applications. The CompM4 is the finest sight that Aimpoint has ever produced. Improved energy efficiency provides … Aimpoint comp ml2 | Ar-15 Accessories …7342. Penalty for refusal to permit entry or examination. Any owner [...]

8/24/2011 5:21:02 PM One neighbor came out and is a fellow shooter that shoots squirrels in his back yard. The others wouldn’t know the difference between this and an Airsoft gun. KimberTLE45: Aimpoints typically allow for faster target aquisition the further forward you run them. People get too caught up in the hunting rifle eye…

I dont see the point of this optic. why not just buy an ACOG and not have to deal with all the gingerbread associated with running the other optic ? It kind of reminds me of having to deal with the auto off buttons on my strikefire. hmaverick [Team Member] 4/23/2011 11:04:08 AM Maybe for [...] MSP – Mountsplus.com – Twitter@OIGUSPS Why do you have tracking # for Small flat rate International boxes if you cant track the boxes???? » Mounting Solutions Plus – mountsplus.com – PageInsider.comA distributor of Scope Mounts and rings and other gun accessories and shooting supplies. Shooting Targets Shooting Targets ! . Mossberg 500 Accessories blamed Mesa, Mesa blamed Mossberg. I finally realized that the screws mesa ships with its 930spx are of a smaller diameter then the Mossberg 500 Accessories pins that the mesa screws replace. Mesa denies this too this day. Told me Mossberg 500 Accessories must have switched the diameter of the pins on them without notification, and get this, I was the first person to ever complain about this. My micrometer does not lie. The fasteners that Mesa provides were of a smaller diameter then the stock mossy pin. This allowed my [...]

Overkill: Future Weapons, Future Wars, and the New Arms RaceDesigned to evade advanced enemy countermeasures, this would-be smart weapon is supposed to permit “high probability target identification in dense shipping environments, and precision Weaver 3B Side Mount Base, 48412 for Winchester 94 after 1964: MSP …Precision and Tactical : Weaver 3B Side Mount Base, 48412 for Winchester 94 after 1964 from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Gross finishes second in huntress votingThe psychiatric ER nurse at Alameda County Medical Center in the Bay Area also wins a Blaser R8 Rifle, an Weaver 1 Side Mount Base, 48401 for Remington 700 & 78 Long …Precision and Tactical : Weaver 1 Side Mount Base, 48401 for Remington 700 & 78 Long Actions from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts … IMPORTANT: Bing News RSS feed has moved! Go to the

Harris Bipods – MSP AR-15 Accessories, Scope Mounts & RingsPrecision and Tactical Harris Bipods: from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters designed and tested by … 9000sc aimpoint I was thinking we could have one that was dedicated to the SKS. I bought (layaway) a Yugo SKS Rifle Stocks today, I paid $251 (is that a good price?) total. It has the flip up grenade sight, and long muzzle device. Stock was dark (possibly dirty?), all numbers matched (don’t know if [...] aimpoint comp ml3 I believe everyone would agree that Trijicon makes a quality product that is very reliable and very durable (based upon the products intended use). I’ve recently swapped out a TR21 for a TA44SR-10 for my 16″ AR. Why? Well, I wanted something lighter and more specific for that rifle but I have [...] ” The way to fix this is to buy a barrel from ADCO in the AR10 section of the EE. He’s got PacNor barrels that have the gas port pushed out 2 inches. He got this idea from John Hollinger who IMO is the David Tubb of AR platform gunsmiths. On the more [...]

2011 March | Ruger 10 22 Accessories – Aimpoint Scopes — Rifle …mossberg 500 accessories – streamlight Flashlights « AR-15 Accessories AK-47 Accessories; ak47 accessories; Bushnell; aimpoint; BSA Optics; Magpul; Trijicon … Leupold Riflescope Leupold

Surefire Flashlights | Ar-15 Accessories …“…any weapon or device capable of being concealed on the person from which a shot can be discharged through the energy of an explosive, a pistol or revolver … I used my SNT as an H.D. gun, and it was very unsettling when the tubbing would not retain the shells after a long period of time. I have read that this is normal, and that it is not designed to hold the shells 24/7, that it is better suited to hold the shells for an 8 hour shift per say. Depending on your use and expectations, you may or may not like them, I dont know how you are going to be using them. Good luck with your shoty, I have always loved the M3, but could never pony up the cash of one. Pics would be greatly appreciated aippi 6/30/2010 1:54:40 PM Good stuff and good people to deal with. They are on the top of the list in customer service. What happens on these web sites is some guy gets something and has an issue. The company makes it right and he still complains. I am a Mesa dealer and only know of [...]

Eotech

Shooting Targets

I haven’t seen the stock on an SKS Rifle Stocks personally except in pictures.
Before cleaning.

The first patch I ran through, and the last one. Some krud Kutter for the stock. A little TLC stuff for the commie lady!

And when I was done with her. Not much difference, but much cleaner! Don’t worry my friend, now your have a proper home. Another American Patriot with a commie tool!

Posts: 22
Link To This Post
EE Feedback 0% (0)
Posted: 10/31/2011 4:00:58 PM EST
I have a Tula, 59/66 and a Polytec. never had a problem out of any. but, then again I clean mine

IIRC, they were AL NG guys and they had proper USGI M2 ball. We were hurting for .30 caliber DMR’s, especially in Trashcanistan. Im suprised nobody raided the stash of T48′s in Quantico and started issuing them… TaylorWSO [Life Member] 6/23/2010 11:15:47 AM Originally Posted By XM287: Trashcanistan. where in afganistan?

Mike What are you looking for?

If you want the best then go Mesa. the recoil reduction systems are totally different so it is hard to compare the stocks. I find the transistion of the weapon through the firing stage is a lot smoother with the Endine buffer then with the simple two spring system of the SpecOps. The one issue that may help you decide is that the Mesa has to fired from the shoulder to receive any recoild reduction as the Endine buffer is in the stock tube. The SpecOps has to two springs, the main one is in the pistol grip so you still get the benifit of recoil reduction when shooting from the hip. ArmyLifer 4/9/2010 8:46:20 PM Originally Posted By aippi: Your wallet will make it for you as you can get a SpecOps for between $110 and $120 but the Mesa is around $300.00. If you want the best then go Mesa. the recoil reduction systems are totally different so it is hard to compare the stocks. I find the transistion of the weapon through the firing stage is a lot smoother with the Endine buffer then with the simple two spring system of the SpecOps. The one issue that may help you decide is that the Mesa has to fired from the shoulder to receive any recoild reduction as the Endine buffer is in the stock tube. The SpecOps has to two springs, the main one is in the pistol grip so you still get the benifit of recoil reduction when shooting from the hip. IMHO, this is the best reply to the OP. The reasons cited are on point and why I went with the Knoxx SpecOps. I added the Knoxx PowerPac (side saddle, high cheek weld) and a Pachmayr GripAll to finish off the stock. I do have one Mesa Tactical piece; their one point sling ring, works great. For the sight a NC Star ; red/ green, 3 brightness levels and 4 different reticles. Yeah, I know NC star is at the bottom of the list, but the wife bought it being nice and I actually like it alot. For $60 what the hell. She likes it and it is the house HD gun which she also shoots. I couldnt be happier with the Knoxx and left a few extra dollars for other toys. Scott66black 4/9/2010 10:44:41 PM +1 on the Mesa/Endine unit , it does cost more but it works oh so good. Makes 3inch magnum slugs feel like your shooting cotton balls out of the thing Depidy_Dawg 4/9/2010 11:35:40 PM I don’t know about the Mesa units, but I like them. My buddy and fellow deputy bought a Knoxx stock from Sportsman’s Guide for under 85 bucks, so the price was great! Shooting that thing is a dream, but the pistol grip is a bit on the large size to be able to accomodate the spring. I like the poster who put a grip sleeve on it, good idea, as the plastic on the Knoxx is slick. I just got a Mossy 590A1 with the 8 shot mag tube. I don’t like the factory pistol grip set up, so I’m leaning towards the Knoxx for mine and the cheek pad and 5 shot holders as I feel that will balance out the nose heaviness of the 590A1. Installing the Knoxx is a breeze and my buddy swears by it. Again, if you have small hands the grip my be a bit on the largeish side for you.

The reason I like the Mesa is because you can get a Hogue grip on it. Depidy_Dawg 4/9/2010 11:43:23 PM Originally Posted By ArmyLifer: Originally Posted By aippi: Your wallet will make it for you as you can get a SpecOps for between $110 and $120 but the Mesa is around $300.00. If you want the best then go Mesa. the recoil reduction systems are totally different so it is hard to compare the stocks. I find the transistion of the weapon through the firing stage is a lot smoother with the Endine buffer then with the simple two spring system of the SpecOps. The one issue that may help you decide is that the Mesa has to fired from the shoulder to receive any recoild reduction as the Endine buffer is in the stock tube. The SpecOps has to two springs, the main one is in the pistol grip so you still get the benifit of recoil reduction when shooting from the hip. IMHO, this is the best reply to the OP. The reasons cited are on point and why I went with the Knoxx SpecOps. I added the Knoxx PowerPac (side saddle, high cheek weld) and a Pachmayr GripAll to finish off the stock. I do have one Mesa Tactical piece; their one point sling ring, works great. For the sight a NC Star ; red/ green, 3 brightness levels and 4 different reticles. Yeah, I know NC star is at the bottom of the list, but the wife bought it being nice and I actually like it alot. For $60 what the hell. She likes it and it is the house HD gun which she also shoots.

MDracer76 5/4/2011 11:09:19 PM Originally Posted By USMC6337: Originally Posted By WarthogA5: Is it ok to put a mag extension on an Benelli M2 Accessories with a field stock under 922r? If not there sure are a lot of snow goose hunters that could get popped. And just about every 3-gunner using an Benelli M2 [...]

MDracer76 5/4/2011 11:09:19 PM Originally Posted By USMC6337: Originally Posted By WarthogA5: Is it ok to put a mag extension on an Benelli M2 Accessories with a field stock under 922r? If not there sure are a lot of snow goose hunters that could get popped. And just about every 3-gunner using an Benelli M2 Accessories Field (which is a lot). You’ll recall that near the end of this season’s “Top Shot” they were using a Salient Arms International Benelli M2 Accessories with a nice, long mag extension. I don’t re reading about or seeing ATF kicking down anyone’s doors for that… true, but its better to be safe than sorry. I’ll be the first to say that the ATF is an unconstitutional branch of government.. unfortunately we’ve strayed far from our founding fathers intent.. and this what we have stooped to. I believe the following quote summs up how we got to be where we are as far as our gun rights: “This will be the best security for maintaining our liberties. A nation of well-informed men who have been taught to know and prize the rights which God has given them cannot be enslaved. It is in the religion of ignorance that tyranny begins.” Benjamin Franklin. leid 5/5/2011 11:30:52 AM Originally Posted By MDracer76: Originally Posted By leid: MDracer76, Thanks for the actual LOP measurement. That LOP is pretty short unless you are wearing a lot of outer clothing/body armor. To get an idea of drop on your Urbino stock: When you mount your Benelli M2 Accessories with Urbino stock & cheek riser normally but quickly, are you looking thru the sights or over them? Also, how did the Urbino fit your Benelli M2 Accessories especially in the trigger area? IIRC, the Urbino for the M4 was tight in the trigger area. Mesa said they would have to modify the M4 mold design slightly sometime in the future. TIA! Carey I did quite a bit of training with the shotgun before I shot a 3 gun with it. Maybe it’s my short arms.. but I feel that its actually perfect. I felt like the original stock was a bit long. When I shoulder the gun the sights are right where I need them

Shooting Targets

Any problem with the smaller diameter sight picture? Do you notice a difference with the polarized filter on the last two ARs you posted? have you tried the RX30? any preference between the two? TheOtherDave6/15/2011 2:26:33 AM I’ve had Trijicon Reflex 2′s and the RX30 that Trijicon is making now. I think the smaller Reflex’s work well but they aren’t nearly as bright as the RX30. The smaller FOV is an issue if you are a professional door kicker, but mine isn’t too much an issue to me-I’ve had one on my SHTF rifle for over a decade-three in total. Now, the RX30 is a much larger sight, it isn’t even the same animal as the Trijicon Reflex 2′s-several orders of magnitude better. Sometimes too bright outdoors so lots of guys cover the light pipe with electrical tape. Same thing for the microTrijicon RMR sights-the dual illuminated version is the brightest that Trijicon makes and it’s too bright when outside for most. jncryer6/15/2011 8:18:46 AM TheOtherDave: I’ve had Trijicon Reflex 2′s and the RX30 that Trijicon is making now. I think the smaller Reflex’s work well but they aren’t nearly as bright as the RX30. The smaller FOV is an issue if you are a professional door kicker, but mine isn’t too much an issue to me-I’ve had one on my SHTF rifle for over a decade-three in total. Now, the RX30 is a much larger sight, it isn’t even the same animal as the Trijicon Reflex 2′s-several orders of magnitude better.

Aimpoint Magnifier

Shooting Targets

Aimpoint CompM2

The Aimpoint Compm2, also known as the M68/CCO (when used by U.S. forces), is the standard sight for the U.S. Army, the U.S. Air Force, and the armed forces of many NATO countries.

Designed for extreme conditions – submersible to 25 meters

The Aimpoint CompM2 is ready for use around the clock due to its compatibility with all generations of night vision devices (NVD)

When the Aimpoint Scopes Compm2 was released, it became the benchmark against which all other combat optics are measured. While primarily utilized by armed forces, the CompM2 is also available to hunters and sport shooters who want a professional-grade sight.

Holds up under the roughest physical handling and can withstand the most severe weather conditions and temperatures

Completely submersible and will withstand pressures up to 2.5 atmospheres allowing it to be taken up to 80 feet (25 meters) under water.

PAPPYO

1/22/2004 4:01:11 AM Ghostface. Your correct HK mags would be a far better option than FAL mags. I pulled the bolt assembly from My 10 awhile ago and checked clearance. The opening between the feedlips on the HK mags would need opened a little for the bottom of the carrier to clear. As far as FAL mags in a 10 I believe they’d have to go to a 3-4 lug rotating bolt to do away with the lower center locking lug on the barrel extension, even then I have my doubts. Armalite took the best approach to the problem at the time with M 14 mags. I have no complaints with the way my 308 DPMS shoots. I do have a problem(s) with their plastic magazines though. They should have went with a good 10 round steel magazine instead of the junk plastic mag. They coulda contracted the steel mags out to a job shop for a few extra bucks and had a far better product than the disposible $29.00 plastic 308 mags. Lets face it if PRO MAG can market a 10 rnd.AR15mag for $14.00 DPMS coulda contacted them for a $30.00 308 mag!